You have no items in your shopping cart.
Product Description
W-DET technology. W-DET is a wide dispersion enhanced throw technology. Unlike most conventional designs, by using the enhanced throw portion of this technology, the PRO 60MC provides amazing volume and sound quality out to the rider and beyond. Wet Sounds™ takes this a step further by incorporating a wide dispersion design. Not only providing the volume and sound quality out to the rider, but providing a widely dispersed sound field that can be heard even while outside of the wake.
The driver compliment in the PRO 60MC uses a single 6.5 inch Pro-Axial™ Wet Sounds™ EFG™ driver and a coaxially mounted HLCD (Horn Loaded Compression Driver) per speaker. This is wet sounds proprietary “Pro-axial” technology. The 6.5 inch Pro-Axial™ is one of the most unique coaxial drivers ever developed. We used our proprietary cone material called EFG™, which is an epoxy fiberglass. Wet Sounds™ developed this cone material specifically for the PRO series of tower speakers. EFG™ is used because it is the optimum cone material that provides a light yet rigid cone, resulting in a quick transient response for tight bass, exceptional sound quality, and great resistance to water. Polyurethane is used for the surround to provide a weather resistant surround that will not rot or deteriorate like conventional foam surrounds and is more efficient than typical rubber surrounds. The high frequency driver is a wide dispersion HLCD (horn loaded compression driver)
Extensive crossover network. Wet Sounds™ developed an advanced crossover network for the
PRO 60MC. Allowing for amazing output to the rider while maintaining exceptional sound quality.
Available colors are Gloss White or Gloss Black with UV inhibitors
All Stainless Steel Hardware
Reinforced Composite Enclosure
Quick Release Lockable Loudspeaker Connector
Specifications:
RMS Watts:
150
Peak Watts:
300
Impedance:
4 ohms
Frequency Response:
20Hz to 20KHZ
Sensitivity:
90 db at 1watt/1 meter
Mid Bass:
6.5" inch EFG™ cone woofer with polyurethane surround
High Frequency:
Pro-Axial™ Driver. Coaxially mounted Titanium Diaphragm High Output Horn Loaded Compression Driver
Note:
All specifications are for each PRO 60 enclosure
The driver compliment in the PRO 60MC uses a single 6.5 inch Pro-Axial™ Wet Sounds™ EFG™ driver and a coaxially mounted HLCD (Horn Loaded Compression Driver) per speaker. This is wet sounds proprietary “Pro-axial” technology. The 6.5 inch Pro-Axial™ is one of the most unique coaxial drivers ever developed. We used our proprietary cone material called EFG™, which is an epoxy fiberglass. Wet Sounds™ developed this cone material specifically for the PRO series of tower speakers. EFG™ is used because it is the optimum cone material that provides a light yet rigid cone, resulting in a quick transient response for tight bass, exceptional sound quality, and great resistance to water. Polyurethane is used for the surround to provide a weather resistant surround that will not rot or deteriorate like conventional foam surrounds and is more efficient than typical rubber surrounds. The high frequency driver is a wide dispersion HLCD (horn loaded compression driver)
Extensive crossover network. Wet Sounds™ developed an advanced crossover network for the
PRO 60MC. Allowing for amazing output to the rider while maintaining exceptional sound quality.
Available colors are Gloss White or Gloss Black with UV inhibitors
All Stainless Steel Hardware
Reinforced Composite Enclosure
Quick Release Lockable Loudspeaker Connector
Specifications:
RMS Watts:
150
Peak Watts:
300
Impedance:
4 ohms
Frequency Response:
20Hz to 20KHZ
Sensitivity:
90 db at 1watt/1 meter
Mid Bass:
6.5" inch EFG™ cone woofer with polyurethane surround
High Frequency:
Pro-Axial™ Driver. Coaxially mounted Titanium Diaphragm High Output Horn Loaded Compression Driver
Note:
All specifications are for each PRO 60 enclosure
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.